# Were You Able To Pull The Blocks Of Wood Easily Explain Your Answer

Yes, I was able to pull the blocks of wood easily because but the other blocks of wood were also moved as pulled the blocks. There is a movement of all the blocks of wood even if I only pulled two blocks. And also because there is unbalance force.

Although the sandpapers were placed in between the block of woods where they all meet, you can still pull the blocks of woods despite the grinding effect. Because of the divergent plate boundaries between the blocks 1 and 2 and blocks 3 and 4, it causes the moving away motion of each other.

Because of the divergent plate boundaries between the blocks 1 and 2 and blocks 3 and 4, it causes the moving away motion of each other. Since the blocks were adjacent to each other, thus, a new boundary was formed which is the transform fault boundary .

## Why are the blocks of wood floating answer?

When we place a piece of solid wood in water, the wood floats on the surface. The density of most woods is less than the density of water, and so the fact that wood floats does not seem so surprising.

## What is your observation of block of wood?

Observation: Volume of a block of wood immersed in glycerine is smaller as compared to the volume of block immersed in water. Explanation: Density of glycerine is more than that of water. Hence, glycerine exerts more upthrust on the block of wood than water, causing it to float in glycerine with a smaller volume.

## What can you say about the relative motion?

significance in motion All motions are relative to some frame of reference. Saying that a body is at rest, which means that it is not in motion, merely means that it is being described with respect to a frame of reference that is moving together with the body.

## What is the name of the truck that carries logs?

A logging truck or timber lorry is a large truck used to carry logs. Some have integrated flatbeds, some are discrete tractor units, and some are configured to spread a load between the tractor unit and a dollied trailer pulled behind it. Often more than one trailer is attached.

## How do log trucks work?

The two log truck types commonly used for transporting logs are long logger trucks (transporting logs 28-52ft in length) and mule train trucks (short logger) which are configured with a truck and trailer for shorter logs/pulpwood (transporting logs/pulp 14-24ft in length).

## How much does a new log truck cost?

The average cost of a new truck, as suggested by survey respondents, was estimated to be approximately \$122,991. The average cost of a new trailer was indicated by respondents to be \$31,909. The average price of new equipment as suggested by respondents is a reliable consensus surrogate for average new equipment cost.

## How many boyfriends can a log truck have?

The loads of logs delivered to the seven mills by tandem-axle trucks ranged from 17,- 710 to 37,520 pounds. Load volumes ranged from 1,199 to 3,759 board feet by the Doyle rule and 1,655 to 4,030 board feet by the In- ternational rule, and from 342 to 689 cubic feet (table 1). Max.

## How much can a log truck haul?

The legal weight limits will vary by jurisdiction but, for example, in the southern states of the USA, they range from 80,000 to 88,000 pounds (36,300 to 39,900 kg) — about 40 short tons (35.7 long tons; 36.3 t). To load the logs, the truck may be fitted with one or more winches or cranes.

## How big is a logging truck?

The diesel-powered, “long-log” truck and its log trailer are capable of hauling logs up to 80 feet in length, although 42 foot logs are the common load length. The gross vehicle weight load is typically 80,000 lbs, depending on axle configuration.

## What do you call a truck that carries logs?

A logging truck or timber lorry is a large truck used to carry logs. Some have integrated flatbeds, some are discrete tractor units, and some are configured to spread a load between the tractor unit and a dollied trailer pulled behind it. Often more than one trailer is attached.

## How much horsepower does a logging truck have?

On average, semi truck horsepower ranges from 400 to 600 hp, while average lb-ft of torque ranges from 1,000 to 2,000.

## How long is a logging truck?

The two log truck types commonly used for transporting logs are long logger trucks (transporting logs 28-52ft in length) and mule train trucks (short logger) which are configured with a truck and trailer for shorter logs/pulpwood (transporting logs/pulp 14-24ft in length).

## More Answers On Were you able to pull the blocks of wood easily explain your answer

### Activity#5 Slide and Shake in Grade 10 science module (Answers) Q32 …

Activity#5 Slide and Shake in Grade 10 science module (Answers) Q32. Where you able to pull the blocks of wood easily ?why or why not Answer 4.4 /5 6 Illyjeon Q32. Were you able to pull the blocks of wood easily? Why or why not? Answer: No, because of the friction between the edges of the block of wood. ^_^ ask questions about your assignment

### How Did Egyptians Build the Pyramids? Ancient Ramp Find … – HISTORY

“Using a sled which carried a stone block and was attached with ropes to these wooden posts, ancient Egyptians were able to pull up the alabaster blocks out of the quarry on very steep slopes of 20…

### PDF

of a block. Figure 2-1 will give you a good start on this. Look at the single block and see some of the ways you can use it. If you lash a single block to a fixed object-an overhead, a yardarm, or a bulkhead-you give yourself the advantage of being able to pull from a convenient direction. For example, in figure 2-2 you haul up a flag

### Solved! How Ancient Egyptians Moved Massive Pyramid Stones

This is because droplets of water create bridges between the grains of sand, which helps them stick together, the scientists said. It is also the same reason why using wet sand to build a…

### Solved! How Ancient Egyptians Moved Massive Pyramid Stones

May 1, 2014, 12:42 PM The ancient Egyptians who built the pyramids may have been able to move massive stone blocks across the desert by wetting the sand in front of a contraption built to pull the…

### Brainly.com – For students. By students.

The Brainly community is constantly buzzing with the excitement of endless collaboration, proving that learning is more fun — and more effective — when we put our heads together. Help the community by sharing what you know. Answering questions also helps you learn! Shoneitszeliapink. Biology.

### What happens when a tablecloth is pulled out from underneath a table …

This question touches on one of the most mysterious things in our universe! The simple answer to your question is inertia. In other words, when you pull the table cloth off the table full of dishes the dishes stay put because of inertia. Inertia is the property of matter that describes its resistance to any change in its motion.

### RILEY – science info for midterm Flashcards – Quizlet

You put a pot of water on the stove and heart it until the water boils. You add the pasta and stir it with a metal spoon. Soon, the spook becomes to hot to use, so you switch to a wooden spoon. You continue to stir with the wooden spoon, and it remains cool enough to use without burning yourself. Consider what happens to the two spoons.

### Physics Ch. 17 Flashcards | Quizlet

Describe the steps of conduction with a positively charged metal bar. a) Teacher holds a positively charged metal bar by its insulating handle and touches it to a metal sphere (attached to an insulating stand.) b) The teacher pulls the metal bar away and the metal sphere acquires a charge.

### PDF

Read each set of directions CAREFULLY. Choose the best answer. When finished, go back and check over your work, making sure that you have answered each question. Part 1. Match each definition with the correct term. _F_ 1. combination of all the forces acting on an object _C_ 2. force that opposes the motion of any object _D_ 3. an object’s …

### 6.1 Solving Problems with Newton’s Laws

In practice, intuition develops gradually through problem solving; with experience, it becomes progressively easier to judge whether an answer is reasonable. Another way to check a solution is to check the units. If we are solving for force and end up with units of millimeters per second, then we have made a mistake.

### G10 Science :Earth and Space -Learner’s Module 1st Quarter

Attach a hook screw on one end of Blocks 2 and 3. 2. Arrange the blocks as shown in the illustration below. 3. Place sandpaper on the side of the blocks where they all meet. 4. Slowly pull Blocks 2 and 3 on its hook screw to the direction indicated by the arrow. Observe the motion of the blocks. Q32. Were you able to pull the blocks of wood easily?

### Newton S Laws of Motion Questions and Answers – Study.com

View Answer. The support force of a body placed on a ramp is due to: a) Law of inertia b) Newton’s first law c) Newton’s second law d) Newton’s third law. View Answer. A ball is thrown vertically …

### 9.3 Conservation of Linear Momentum – University Physics Volume 1

It’s a good idea, at this point, to make sure you’re clear on the physical meaning of the derivatives in .Because of the interaction, each object ends up getting its velocity changed, by an amount dv.Furthermore, the interaction occurs over a time interval dt, which means that the change of velocities also occurs over dt.This time interval is the same for each object.

### 15.1 Types of forces | Forces | Siyavula

blocks (wooden or metal) sponge or piece of foam ball blown up balloon putty or play dough INSTRUCTIONS: Work in groups of 2 or 3 as you follow the instructions and describe the effects of the forces that you are applying. Start with the ball and place it on the ground. Push it towards your partner.

### Get Homework Help with Chegg Study | Chegg.com

Chegg survey fielded between April 23-April 25, 2021 among customers who used Chegg Study and Chegg Study Pack in Q1 2020 and Q2 2021. Respondent base (n=745) among approximately 144,000 invites. Individual results may vary. Survey respondents (up to 500,000 respondents total) were entered into a drawing to win 1 of 10 \$500 e-gift cards.

### Let’s Do Some Physics and Learn About the Momentum Principle and the …

Answer number 2: They stop in the same amount of time. Yes, it’s true that the car has a lower mass and a higher acceleration. However, it starts with a much larger velocity since the two vehicles…

### Why is it Easier to Pull a Wagon Up a Ramp Than to Lift it … – Coursera

Enroll for Free. An introduction to physics in the context of everyday objects. Professor Bloomfield examines the physics concepts of Newton’s third law including conserved quantities, support forces, work, energy, and mechanical advantage working with ramps.

### How do pulleys work? – Explain that Stuff

Dec 26, 2021If you want to raise the weight 1m into the air, you have to pull the loose end of the rope a total distance of 1m at the other end. Artwork: How pulleys work#1: With one wheel, a pulley simply reverses the direction of the force you apply. It doesn’t alter the force in any other way.

### Slide Right on by Using an Inclined Plane – TeachEngineering

Archimedes was a famous mathematician and inventor who more than two thousand years ago designed the Archimedes screw — a machine that was turned by horses or people to raise water. When we use a screw to fasten objects, the screw converts rotating motion of turning the screw into straight-line motion of the screw into wood or other material.

### Engineering: Simple Machines – Lesson – TeachEngineering

The wedge is a simple machine that forces objects or substances apart by applying force to a large surface area on the wedge, with that force magnified to a smaller area on the wedge to do the actual work. A nail is a common wedge with a wide nail head area where the force is applied, and a small point area where the concentrated force is exerted.

### PDF

24 WORK AND ENERGY 4-SCT19: BLOCKS SLIDING DOWN FRICTIONLESS RAMPS—WORK BY THE NORMAL FORCE Two identical blocks are released from rest at the same height. Block A slides down a steeper ramp than Block B. The blocks reach rhe same final height – Start Block B – – Finish indicated bv the lower dashed line.

### 6 Chapter Review – University Physics Volume 1

6.4 Drag Force and Terminal Speed. Drag forces acting on an object moving in a fluid oppose the motion. For larger objects (such as a baseball) moving at a velocity in air, the drag force is determined using the drag coefficient (typical values are given in Table 6.2), the area of the object facing the fluid, and the fluid density.; For small objects (such as a bacterium) moving in a denser …

### Young S Modulus Questions and Answers | Study.com

View Answer. If young modulus of a metal is 10^10 N/m^2, express it in a new system of units where the units of mass, length and time are 10 g, 100 cm, and 1/10 sec respectively. View Answer. The …

### How do bullets work? – Explain that Stuff

Jan 4, 2021This is what happens when you fire a 7g (0.25 oz) projectile at a velocity of 25,000 km/h (16,000 mph) into a cast aluminum block. This huge hole has been made by something weighing about as much as an iron nail! Even if something is that tiny, if it’s traveling at very high speed it will have enough kinetic energy to do a lot of damage.

### The Real Truth About Block Planes | Popular Woodworking

Jun 8, 2021The nice thing about using a block plane for this operation – in contrast to a bench plane – is that it’s easy to close and open the mouth without dismantling the tool. Blade adjuster: Many block planes have a wheel at the back that allows you to increase or decrease the depth of cut. Inexpensive tools do not.

### UCSB Science Line

To answer your question, you can think of water absorbing heat like the break in a game of pool. A fast moving molecule (the cue ball) strikes a lattice of slow moving ice or water molecules. The cue ball rapidly decelerates (is cooled) as the rest of the balls jumble around the board in a liquid or gas-like state. Answer 3:

### Slippery Science: Explore Friction by Launching Stuff

The amount of friction between your feet and the floor surface determines how well you can slide. Some combinations of surfaces, such as socks on a wooden floor, produce very little friction …

### Solved A string is used to pull a wooden block across the | Chegg.com

A string is used to pull a wooden block across the floor. Four forces are applied to the block: the pulling force, the friction force, the normal force and the gravity force. Which of them do the work (positive or negative) and which do not? Explain. Question: A string is used to pull a wooden block across the floor. Four forces are applied to …

### Solved 3. A string is used to pull a wooden block across the – Chegg

F 1 1 d 3. A string is used to pull a. Question: 3. A string is used to pull a wooden block across the floor without accelerating the block. The string makes an angle to the horizontal as shown in the diagram. a. Does the force applied via the string do work on the block? Explain. b.

##### Resource

https://brainly.ph/question/808977
https://www.history.com/news/ancient-egypt-pyramid-ramp-discovery
http://www.constructionknowledge.net/public_domain_documents/Div_1_General/Basic_Skills/Block_and_Tackle_Basic%20Machines%20NAVEDTRA%2014037%201994.pdf
https://www.livescience.com/45285-how-egyptians-moved-pyramid-stones.html
https://news.yahoo.com/solved-ancient-egyptians-moved-massive-pyramid-stones-194231772.html
https://brainly.com/
https://quizlet.com/311279292/riley-science-info-for-midterm-flash-cards/
https://quizlet.com/202727722/physics-ch-17-flash-cards/
https://opentextbc.ca/universityphysicsv1openstax/chapter/6-1-solving-problems-with-newtons-laws/
https://www.slideshare.net/nairamode/g10-science-earth-and-space-learners-module-1st-quarter
https://opentextbc.ca/universityphysicsv1openstax/chapter/9-3-conservation-of-linear-momentum/
https://www.chegg.com/study
https://www.wired.com/story/physics-momentum-principle-work-energy-principle/