Should I Add Zinc To My Oil

More Answers On Should I Add Zinc To My Oil

Should I add zinc to my oil? – AskingLot.com

In this way, do I need to add zinc to my oil? Zinc acts as a friction inhibitor, and research suggests that older engines using “flat tappet” lifters in the engine (pretty much any V6 or V8 older than 1988) need to have zinc present in the engine oil in order to keep the camshaft and lifters from wearing prematurely.

Should you add zinc to engine oil? – Auto Blog Garage

No engine harm: Unlike zinc motor oils, a zinc replacement additive will not harm an engine’s catalytic converters or emissions controls, increasing your engine’s longevity. Environmental responsibility: The emissions from older engines that use zinc-based motor oils can be harmful to the environment. What is the best motor oil with zinc?

Zinc Additives in Motor Oil and How They Help – AutoZone

An engine’s break in period is critical for its long-term success, as everything from main and rod bearings, to rings, cams and oil pump are getting adjusted to their new life. Remember, if you have an older vehicle, whether it’s a 1966 Mustang or a 1979 Ford pickup, it’s a good idea to put zinc into the oil. More on Synthetic and Conventional Oil

Tech 101: Zinc in oil and its effects on older engines – Hemmings

This has caused oil companies to reduce levels of many additives, including zinc and phosphorus, to the required maximum in order to meet the current specification. Listed here are the current specifications for maximum amounts of additives to achieve the API ratings. P is phosphorus, Zn is zinc, and B is boron.

Do I Need Zinc in My Car’s Oil? – Rislone

High zinc oil has many positives, as well as a few cons to keep in mind. The reason why engine manufacturers started asking motor oil companies to reduce ZDDP levels is because it can create build-up in the catalytic converter, which can have a negative impact over time. Oil with lower levels of zinc is also better for the environment.

Too Much Zinc In Your Oil? – MotorWeek

SMITH: Yes, and this is it right here. It’s actually a family of additives Zinc-dialkyl-dithiophosphate. But let’s stick with Zinc or phosphorous when we refer to it. GOSS: Okay, now this has quite a long history in oil. SMITH : Yes, it was first used back in the 1940s, as a corrosion inhibitor to fight lead-copper corrosion.

Zinc Oil Additive: Why Your Classic Car Needs It

As a side note: Many engine builders also recommend high levels of zinc oil additive during the break-in period for a new motor. Some crate engines and fresh builds push ZDDP to 2,000 ppm during the first 500 miles of use when the engine is most vulnerable to uneven wear. Isn’t it worth using the oil that your engine was originally designed for?

Adding Zinc to your oil? | Ford Powerstroke Diesel Forum

2,139 Posts. #8 · Feb 15, 2015. Zinc clings… It won’t abandon hard parts… It allows oil to cling to hard parts when they sit long periods. Great for classic cars that aren’t moved much, and marine engines that can collect condensation easier than others. Zinc will destroy a catalytic converter in short order…

The Effects of Zinc Oil Additives on Older Engines | Rislone

The primary role of motor oil with zinc added to it is to ensure that there is no metal-to-metal contact occuring between parts of your engine. The oil accomplishes this by creating a protective film between parts. As it does the job so well, it’s often used in high-performance racing cars and other offroad sport vehicles.

Zinc additive for engine oil? – iboats Boating Forums

308. Jun 17, 2015. #1. I admit that I have been away for a while–layoff, relocation, blah, blah, blah and now it is time to get into the boating scene. While buying oil/fuel filters this marine mechanic started a rant about EPA standards and needing to use a zinc additive to the engine oil. Otherwise I will flatten the lobes on the engine cam.

Do Older Engines Need Oil With ZDDP Additives? – AMSOIL Blog

Jun 2, 2020After break-in, we recommend using an oil with at least 1,000 ppm ZDDP in a flat-tappet engine. That way, you’re providing your expensive engine with maximum protection against wear and horsepower loss. AMSOIL Z-ROD Synthetic Motor Oil, our primary recommendation for classic cars and hot rods, contains more than… 1,400 ppm zinc 1,300 ppm phosphorus

Zinc Additive For Oil – TheFitnessManual

May 25, 2021Should I add zinc to my oil? Zinc is a mineral that is found in many foods, including nuts, seeds, and vegetables. It is also found naturally in some fish, such as salmon, trout, mackerel, sardines, anchovies, shrimp, oysters, clams, mussels, crabs, lobster, scallops, salmon and trout. but it is not recommended to add it to your oil. …

Zinc’S Removal From Engine Oils and Its Effects on Older Engines

The zinc and phosphorus ingredients appear to be most effective when they are used together. ZDDP/ZDTP is one of many additives that are put into conventional motor oil to improve its lubrication qualities. Other ingredients, such as boron and molybdenum, are also added as lubricant enhancers.

Why Does Flat Tappet Need High Zinc Oil [Know The Truth]

Aug 25, 2021You should add zinc to oil if your car engine is old. The high zinc oil provides ultimate wear protection, and your older car needs it badly. Do I need to add zinc to synthetic oil? Yes, you need to add zinc to synthetic oil for your flat tappet cams if you want to add longevity to your vehicle engine. Does diesel oil still have zinc in it?

Do I need zinc in my engine oil ? | Ford Mustang Forum

Jo Scibo. Schaeffer’s Oil covers it really well. Moly in the oil covers 550,000 psi vs zinc around 70,000 psi. Supreme 7000 is a semi synthetic 15w-40 or even the 10w-40 or if you are a 20w-50 guy that will work too. I cut 20 degrees temp in my Harley by switching to the 20w-50 vs Harley’s zinc loaded HD360 and there Syn 3.

would higher zinc oils be better for mower engines then … – LawnSite

I bought several cases of the old Kendall that had the original amount of zinc. A lot of the old racers swore by it and that the zinc made solid roller lifters and the billet cams last much longer. I took their word for it. Allthough Im sure there would be benefits of adding zinc to my mower oil, I change so often the oil never even changes color.

Should I Add a Zinc Oil Additive? – Google Groups

Certainly, some of the “true” synthetics like. Mobil1 15-50, RP, Amsoil, Redline, etc. are great oils, but maybe not. great enough to stretch out an OCI in a carbed motor when the same. money can buy multiple 5-gallon jugs of good HDEO allowing numerous. oil changes for the same (or less) money. JMO. Bill.

zinc – does my tractor need it in its oil? | Tractor Forum

Only show this user. From what we have been advised on our older low tech diesels, oil is required with a minimum of 1000ppm or above of phosphorous (not zinc) to maintain high pressure lubrication/anti-wear in the rings & valve train. That being said ultimately IMO unless it’s an old engine that has been recently rebuilt to original factory …

Ask Away! with Jeff Smith: Can I Mix Zinc Additive with Off-the-Shelf …

Most enthusiasts know by now that back in 1996, the American Petroleum Institute (API) changed the formulation for engine oil by reducing the level of zinc and phosphorous (commonly called ZDDP, which is short for zinc dialkyl dithiophosphate) from levels of around 1,500 parts-per-million (ppm) to what is now 800 ppm with API designation SN.

Why Is Zinc In Motor Oil? – Firestone Complete Auto Care

Tiny amounts of motor oil can end up in the combustion chamber of the engine. That helpful zinc in the oil can turn into ash, which is then sent down the exhaust pipe. There, it can settle into the catalytic converter, which can gradually make it less effective over time. Obviously, this isn’t great news for vehicle manufacturers who vouch …

Should I add zinc to my oil?

邏 Click to see full answer. Similarly, you may ask, do I need to add zinc to my oil? 邏 Zinc acts as a friction inhibitor, and research suggests that older engines using “flat tappet” lifters in the engine (pretty much any V6 or V8 older than 1988) need to have zinc present in the engine oil in order to keep the camshaft and lifters from wearing prematurely.

Should I add ZDDP to my oil? | Page 2 | Ford Powerstroke Diesel Forum

By adding a ZDDP additive you are increasing wear protection exponentially and therefore increasing the TBN of your virgin oil. I see no problem at all with increasing oil life by 1000 mile increments to find that sweet spot on ROI. Recommendation: Extend current oil change to 6000 miles and execute a UOA w/ TBN for further analysis.

Zinc Oil Additive: Why Your Classic Car Needs It

Zinc oil additive content, or ZDDP, is typically expressed in parts per million (ppm). To meet the standards required to protect an older motor, you’ll want to look for a ZDDP level of between 1,000 ppm and 1,400 ppm, with a similar rating for ZDTP phosphorus content. As a side note: Many engine builders also recommend high levels of zinc oil …

Zinc Additive For Oil – TheFitnessManual

Should I add zinc to my oil? Zinc is a mineral that is found in many foods, including nuts, seeds, and vegetables. It is also found naturally in some fish, such as salmon, trout, mackerel, sardines, anchovies, shrimp, oysters, clams, mussels, crabs, lobster, scallops, salmon and trout. but it is not recommended to add it to your oil. …

>>ADD

Thats why most engine oil manufacturers have removed or limited it from their products. In my case I ran it for a year on a higher miledge vehicle that probably uses oil and my cat cease to function only after having bought and installed 2 years prior. Funny thing is the second O2 sensor and ecm never told me my cat went bad.

Zinc additive for engine oil? – iboats Boating Forums

308. Jun 17, 2015. #1. I admit that I have been away for a while–layoff, relocation, blah, blah, blah and now it is time to get into the boating scene. While buying oil/fuel filters this marine mechanic started a rant about EPA standards and needing to use a zinc additive to the engine oil. Otherwise I will flatten the lobes on the engine cam.

Adding Zinc additive to oil? | Jeep Enthusiast Forums

The 1/2 bottle of Lucas 10063 adds about $6.00 to each oil change which is far cheaper than purchasing the Lucas Hot Rod oil at about $35.00 per 4 quarts when I get 5 of the Castrol for $18.00. An 8 quart oil pan makes oil changes on a daily driver all that more expensive.

Can you add zinc additive to synthetic oil? – Quora

Answer: You can, but you are destroying the careful balance of additives in that oil, so you will change the balance between clean and protection. And since the Zinc additives are ZDDP, they are zinc/phosphorous additives, and you may be adding enough phosphorous to actually damage your cam (as …

Zinc’S Removal From Engine Oils and Its Effects on Older Engines

Both have been used as an anti-wear ingredient in engine oil for many years. The zinc and phosphorus ingredients appear to be most effective when they are used together. ZDDP/ZDTP is one of many additives that are put into conventional motor oil to improve its lubrication qualities. Other ingredients, such as boron and molybdenum, are also …

Adding Zinc aditive to oil in a Jeep 4.0 | Bob Is The Oil Guy

I agree, SM oils don’t have enough zinc, which IMO should be around 1100 to 1200 ppm rather than the SM level 800.I recently put in 1.5 oz of the lucas break in zinc supplement, which should boost my 4 liters of oil to about that level; btw, I think this lucas break in product is the only decent lucas product out there–I was only able to find it ordering it online (through amazon); all the …